Top 10 Car Mobile Phone Holders UK – Mobile Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. Blukar

#ad

4 in 1 Super Stable for Car Dashboard/Windscreen/Air Vent, Blukar Car Phone Holder, One Button Release for All 4.7 to 6.7 inch Smartphones, Adjustable Car Phone Mount Cradle 360° Rotation

#ad
Blukar #ad - All installation can be done just in seconds. Two models can be firmly installed on the car dashboard, windshield or vents to satisfy your multiple demands at your convenience. Versatile angles: the fully 360-degree rotation allows for optimum viewing and easier use of functions, such as your GPS and phone calls.

No complicated operation to keep safer and better experiences for driving. The extendable telescopic from 3. 6" to 5. 9" and can be pivoted up and down 270°. High quality with upgraded material: adopted heat-resistant pc material which is more durable, environmentally friendly, and non-toxic to ensure much longer lifetime and more stable for holding your cell phone. 4 in 1 & multi-function: equipped with ultra-strong dashboard suction cup that provides strong sticky suction and leaves no residue behind.

The extra non-slip silicone arm can prevent the phone from scratching and hold the phone more stably. No view blocking, no distraction, no danger. One-handed operation & one button release: the side arms can be opened smoothly with the one-button release. No switch, no magnet, only smart mechanism. Extra durable air vent clip is included. Just one-handed operation can answer calls and enjoy an easier and safer driving experience.
BrandBlukar #ad
ManufacturerBlukar #ad
Height7.3 cm (2.87 Inches)
Length11.2 cm (4.41 Inches)
Weight0.23 kg (0.52 Pounds)
Width11.6 cm (4.57 Inches)
Part NumberK9751
ModelK9751

2. Blukar

#ad

Super Stable Car Phone Holder Compatible with 4.0 to 6.7 inches Phones, Blukar Car Phone Holder, Air Vent Car Phone Mount Cradle 360° Rotation, Upgraded Hook Clip and One Button Release Function

#ad
Blukar #ad - It can be easily adjusted with one hand without blocking the line of sight, giving you a more comfortable and safer driving experience. Wide compatibility the phone holder is compatible with all 4. 0-6. 7 inch devices, including iphone 14/14 plus/14 pro /14 pro max/13/13 pro/12/12 pro/12 pro max/se2020/11/xs/XR/7/8, huawei p30/p30 pro/P40, oneplus 5t/7 pro/8t, galaxy s9/s10/ s20, etc.

Safe and stable this car phone holder with the latest hook clip design, roads with potholes, speed bumps and bumpy roads, it can be securely attached to the air vents. One hand operation press the release button on the side to open the clamp arms, place your phone and squeeze the clamp arms to lock, easy to insert and remove your phone with single hand while the holder provides a firm grip on your phone. 360° flexible rotation the 360° rotatable head will provide you with the best viewing angle to meet your horizontal or vertical viewing requirements.

And holds your phone solid even on turning, ensuring your driving safety. Anti-scratch rubber the clip arms and support feet are equipped with super soft and super elastic silicone pads, collisions, and at the same time effectively solves common problems such as bumps, the thick shockproof design perfectly protects your phone from scratches, and ensuring your device never slip out when driving.
BrandBlukar #ad
ManufacturerBlukar #ad
Height1.8 cm (0.71 Inches)
Length10 cm (3.94 Inches)
Weight0.13 kg (0.29 Pounds)
Width6.1 cm (2.4 Inches)
Part NumberK9771
ModelK9771

3. Beikell

#ad

Phone Holder for Car with One Button Release and Strong Sticky Gel Pad for Mobile Phones from 4.7 to 6.7 inches, Beikell Car Phone Holder, Adjustable Car Phone Mount Cradle 360° Rotation

#ad
Beikell #ad - Versatile viewing: - highly-flexible ball-joint 360° rotation provides infinite viewing angles. Remove easily by pulling the suction pad without leaving any nasty mark. Secure stable install: - extra strong suction cup with super sticky gel pad sticks securely on the dashboard or most flat surfaces.

Extendable arm: - the telescopic arm can extend to your desire length and pivot up or down for optimal viewing. Preventing from blocking your view while driving. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. The silicone arms of the holder protect your phone from scratches and prevent it from falling while driving.

Durable and full protection: the heat resistant PC material makes our phone holder more stable than other supports on the market. Convenient lock and release: - One-button release system enable you to lock or release your phone with just one hand operation.
BrandBeikell #ad
ManufacturerBeikell #ad
Height6.5 cm (2.56 Inches)
Length13 cm (5.12 Inches)
Weight0.21 kg (0.46 Pounds)
Width8.5 cm (3.35 Inches)
Part NumberB6007
ModelB6007

4. Blukar

#ad

Adjustable Car Phone Mount Cradle 360° Rotation, 2022 Upgraded Strong Sticky Gel Pad for Car Dashboard/Windscreen, One Button Release for All 4.0''-6.7'' Phones, Blukar Car Phone Holder

#ad
Blukar #ad - Made of heat-resistant high-quality materials ABS+PC, environmentally friendly and non-toxic, extending the service life of your phone. Upgraded one-button releasemore flexible and convenient button design, simply press the release button on the back to open the clip arms, allowing you to easily install or remove your phone.

Super suction, easy installationthis car mount is equipped with a super sticky suction cup base, durable, pull up/press the suction cup lock to securely install the car mount on the windshield/dashboard or other flat surfaces without worrying about falling or leave traces. You can make and receive calls at any time, push the clip arms on both sides to tighten them. The phone can be placed horizontally and vertically for you easily operating and viewing your phone. True one-button type Manual operation, allowing you to concentrate more on driving the car.

360° all-round viewing anglethe 360° rotatable ball design facilitates easy adjustment of the phone holder to obtain the best viewing angle, avoids blocking the line of sight, and greatly improves driving safety. Universal compatibilityour universal car phone holder is compatible with all 4. 0 - 6. 7 inch phones such as iphone 14/14 plus/14 pro /14 pro max/13/13 pro/12/12 pro/12 Pro Max/SE2020/11/XS/XR/8, Huawei, Galaxy, Oneplus and more. The thick shockproof design perfectly protects your phone from scratches, while effectively solving common problems such as bumps and collisions.
BrandBlukar #ad
ManufacturerBlukar #ad
Height6.5 cm (2.56 Inches)
Length11 cm (4.33 Inches)
Width10 cm (3.94 Inches)
Part NumberK9778
ModelK9778

5. YOSH

#ad

YOSH Car Phone Mount Holder Magnetic Air Vent in Car Mobile Phone Cradle Magnet for iPhone 11 Pro Max XR XS Max X 8 7 6s Plus Samsung S20 S10+ A70 S10 Huawei P30 P20 Pro Xperia Xiaomi Oneplus etc.

#ad
YOSH #ad - It’s also very convenient for you to adjust the angle of your device. Powerful magnetism built-in powerful 4 × n50 magnets, YOSH magnetic phone car mount provide strong magnetic force, so that it can securely hold your phone whether on bumpy road, or under a sudden braking.

Wide compatibility yosh smartphone car holder is compatible with cars with horizontal vents such as Renault Citroën, Peugeot, and for smartphones like iPhone, Wiko, Motorola, Nokia, Samsung, VW Bmw, LG, Audi and Skoda and etc. Huawei, oppo, htc, oneplus, Nexus, GPS and MP3 music players. Exquisite design small size 40mm-dimension makes YOSH Magnetic Car Phone Mount hardly noticeable while not being used, and will not block your view when driving.

Anti-scratch rubber soft rubber silicon type: 50D protects both your air vent and phone from scratches. Not for magsafe tips for iphone 14/13/12 Series: please stick the metal plate to your phone or outside your phone cases before using this car mount. Equipped with superior heat resistance protects YOSH magnetic phone holder from deformation. One-hand operation using yosh car phone holder, you can simply attach or remove your phone with one hand.
BrandYOSH #ad
ManufacturerYOSH #ad
Height9.98 cm (3.93 Inches)
Length7.87 cm (3.1 Inches)
Weight0.04 kg (0.08 Pounds)
Width3.81 cm (1.5 Inches)
Part NumberYS-JP-CM-153S
ModelYS-JP-CM-153S
WarrantyWarranty & Support: YOSH provides an 18-Month Warranty for all of our products.

6. Cinati

#ad

Android Smartphones, Samsung, Slip Free Desk Phone Stand Compatible with iPhone, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Cinati Car Phone Holder, Black, GPS Devices and More

#ad
Cinati #ad - Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.

Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one. Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, s 20 plus/ 8 plus / 9 plus /10 plus, s 7 edge, samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, Pixel, Mi, S20/S 8 /9 /10, HTC, IPAD, LG, Nexus, Sony, Huawei, Garmin and so on.

Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
BrandCinati #ad
ManufacturerCinati #ad
Height4.5 cm (1.77 Inches)
Length12 cm (4.72 Inches)
Weight0.19 kg (0.42 Pounds)
Width12 cm (4.72 Inches)
Part NumberFHD-UK

7. Arteck

#ad

13, Xr, 12, 13 Pro, Android Smartphone, 14 Pro, Arteck Car Mount, Universal Mobile Phone Car Mount Holder 360° Rotation for Auto Windshield and Dash, Xs, GPS, for Cell Phones Apple iPhone 14, 11

#ad
Arteck #ad - Easy installation: using the mount is extremely convenient because of its human oriented design. The mount is generally lightweight and compact making it extremely handy and easily stored. Sturdy design: the sturdiness of this mount comes from its combination of premium quality rubber reinforced with extra strong durable plastic.

Infinite angles: 360 degree rotation ball and adjustment knobs provide vertical and horizontal viewing angles. The combination of these two materials gives this mount the much needed strength. Multi mount locations: this multifunctional smartphone mount can be mounted on a variety of locations and surfaces because the sticky gel pad sticks securely to most surfaces, yet still easy to remove.

Universal compatibility: the mount can be used with a variety of smartphones, 13 pro, xr, 8, 6, including iphone 14, 13 Mini, samsung s series, 11, 8 plus, 12 Pro, 5, Xs Max, Xs, 14 Pro, 11 Pro Max, X, 7, 12, 11 pro, 13, Note and all other smart phones and GPS navigations.
BrandArteck #ad
ManufacturerARTECK #ad
Part NumberS056-Black
ModelS056-Black
Warranty2 Year Limited Warranty

8. Blukar

#ad

Universal Air Vent Car Phone Mount with Hook Clip and Dual Release Button Auto Lock 360 Rotation Mobile Phone Cradle Compatible with iPhone and Other 4.0''-6.7'' Smartphones, Blukar Car Phone Holder

#ad
Blukar #ad - True one-handed operation for easy and safe driving, and easy to set up and attach to air vent. One hand operation simply press the dual quick-release buttons on the side of the holder and the side arms will open automatically, allowing you to remove your phone in a second. It only requires one-handed operation, enough to ensure driving safety and facilitating your navigation or other phone operations.

Suitable for most vertical or horizontal air outlets. Strong air vent clip the clip of the air vent car mount is designed in a 'hook shape' to securely hold the mount to the vent so that your phone won't fall or wobble, no matter how bumpy the road is, and the clip's silicone protective pads protect the vent from scratches. It is recommended that the thickness of the phone with the case does not exceed 13mm/05in. Auto lock with the auto-lock mechanism, you simply place the phone in and press it down with single hand and the arm clamp will automatically lock to hold your phone firmly without wobbling, and the support feet leave plenty of room for you to connect the charging cable to charge your phone.

360° viewing angle the 360-degree rotatable ball joint will provide you with the best possible viewing angle for your horizontal, vertical or any viewing angle requirements. Universal compatibility blukar universal car phone holder is compatible with all 4. 0-6.
BrandBlukar #ad
ManufacturerBlukar #ad
Height5.4 cm (2.13 Inches)
Length10.8 cm (4.25 Inches)
Weight0.07 kg (0.16 Pounds)
Width10.5 cm (4.13 Inches)
Part NumberK9754
ModelK9754

9. Rainway

#ad

Etc., 360°Rotation Mobile Phone Holder for Car, 2022 Upgrade Anti-Shake Metal Hook, Samsung, Compatible with iPhone, Rainway Car Phone Holder, Air Vent Car Phone Mount with Auto Lock

#ad
Rainway #ad - The inside of the bracket adopts a spring retraction structure, and the grip is tighter, which can be grasped more firmly than other brackets, giving you Cell phone fatherly care. Quick one touch lock/releasethe rainway car phone holder adopts a one-button automatic locking mechanism, which can quickly install or remove the phone with only one hand operation.

It supports all thick phone cases on the market, Samsung Galaxy S22/S21, this stand is an ideal gift for family or friends, Thick box etc.2022 upgraded metal hookthe metal hook of this car phone holder is made of heat-resistant ptfe material and surgical grade stainless steel to fit 99. 9% of the vents on the market, the three feet rest firmly on the exhaust to keep it in place the other brackets will wobble. Universal compatible car phone holder this car phone holder is compatible with 4.

0-7. 0 inch mobile phones, otterbox cases, etc. The space reserved at the bottom of the stand can be connected to the charger to charge the phone. By hooking onto one of the car's exhaust vanes, even on particularly rough roads. 360° rotationthis air vent phone car mount can be rotated at different angles according to your needs, you can easily switch horizontal, the ball joint is designed to find the best viewing angle for you, vertical or more layouts with just one hand for your enjoyment The safest and most comfortable driving experience.
BrandRainway #ad
ManufacturerRainway #ad

10. Niofind

#ad

SUV, Niofind Car Phone Holder Windscreen Mount, Pickup Truck, Compatible with iPhone14/13/12/11, Long Arm Adjustable/360°Rotation Mobile Phone Holder for Cars, Samsung ect, Phone Car Holder for Van

#ad
Niofind #ad - Compatible devicesthis phone holder for car is suitable for all phones within 4~7" and almost all cases iphone, A series A73/72/71/A53/52/51 and so on and other brands like Google, LG, lg, samsung galaxy S series S20/21/22, note series note 10/20, Samsung, google, etc. With this car phone mount for car windshield, you'll never have to worry about your phone slipping or getting scratched.

Long gooseneck designthe gooseneck long arm of this mobile phone car mount is up to 12 inches/30cm, which makes the device closer to your sight, and the interior is made of aluminum alloy material for a longer service life. The suction cup has no gel and can only be used on the windshield. It is compatible with iphone 14/ 13/ 12/ 11 pro/ pro max/ mini/ Xs/ Xs Max/ Xs/ XR/ X, Oneplus and so on. Powerful suction cupthe phone holder for cars' suction cups are made of a layer of adhesive and coupled with a vacuum suction pad made of TPU, wash it with warm water, which can withstand objects with a weight greater than 1kg.

360° rotationthis gooseneck long arm phone car mount can be rotated at different angles according to your needs; the ball joint is designed to find the best viewing angle for you, and you can easily switch between horizontal and vertical with just one hand. Note: if the suction cup loses its grip, then air dry it to restore its adsorption. It brings you the safest and most comfortable driving experience. Anti-shake and anti-scratchthis car mount is equipped with rubber mats on both arms, which can effectively protect the phone from being scratched.
BrandNiofind #ad
ManufacturerNiofind #ad
Height5 cm (1.97 Inches)
Length10 cm (3.94 Inches)
Width5 cm (1.97 Inches)
ModelWindscreen
Warranty90 Day Warranty Against Manufacturer Defects